Catalogue - Budshlyakhmash

Brush GC090V

annastasia2 — Sat, 04 Oct 2025 12:34:56 +0000

The Pronar GC090V brush is designed for cleaning sidewalks, paths, roadsides, and other surfaces from dust, debris, fallen leaves, and small waste.
It is mounted on multi-functional booms, allowing cleaning in narrow and hard-to-reach areas.

The working width is 950 mm.
The brush is equipped with metal bristles, enabling operators to choose the optimal configuration depending on cleaning tasks.
A ±25° swivel angle provides comfortable and precise operation.

To operate, the Pronar GC090V brush requires a compatible boom.
It is designed to work with the following models:
Pronar WWT420, WWT480, WWT600, WWT600P, WWT600K, WWT700T, WWT800T, WWT608K, WWP500, WWP500U, WWP500UH, WWP600, and WWP800U (Unimog).

The Pronar GC090V is an effective solution for municipal and road maintenance services, ensuring high-quality cleaning of streets, sidewalks, and urban areas.

The post Brush GC090V first appeared on Budshlyakhmash.

Brush GC060V

annastasia2 — Sat, 04 Oct 2025 12:29:51 +0000

The Pronar GC060V brush is designed for cleaning sidewalks, paths, roadsides, and other surfaces from dust, dirt, fallen leaves, and small debris.
It is mounted on multi-functional booms, allowing operation in narrow and hard-to-reach areas.

The working width is 600 mm.
The brush is equipped with metal bristles, providing the ability to choose the optimal setup depending on the cleaning task.
A ±25° swivel angle ensures easy and precise control.

To operate, the Pronar GC060V brush requires a compatible boom.
It is suitable for use with the following models:
Pronar WWT420, WWT480, WWT600, WWT600P, WWT600K, WWT700T, WWT800T, WWT608K, WWP500, WWP500U, WWP500UH, WWP600, and WWP800U (Unimog).

The Pronar GC060V is an efficient tool for municipal and street maintenance services, providing cleanliness and proper sanitary conditions in urban areas, sidewalks, and public spaces.

The post Brush GC060V first appeared on Budshlyakhmash.

Stump cutter GF040K

annastasia2 — Sat, 04 Oct 2025 12:23:50 +0000

Pronar GF040K stump grinder is designed for grinding and removing tree stumps after logging or cutting.
When mounted on multi-functional booms, it allows work in hard-to-reach areas such as roadsides, parks, roadside ditches, and green urban zones.

To operate, the Pronar GF040K stump grinder requires a compatible boom.
It is compatible with the following models:
Pronar WWT420, WWT480, WWT600, WWT600P, WWT600K, WWT700T, WWT800T, WWT608K, WWP500, WWP500U, WWP500UH, WWP600, and WWP800U (Unimog).

Pronar GF040K stump grinder is an essential piece of equipment for municipal and road maintenance services engaged in caring for green areas and clearing sites from tree residues after felling.

The post Stump cutter GF040K first appeared on Budshlyakhmash.

GM 500 sign washing module

annastasia2 — Sat, 04 Oct 2025 12:17:49 +0000

Pronar GM500 washing module is designed for efficient cleaning of road signs, information boards, and barrier fences.
When mounted on multi-functional booms, it provides access to hard-to-reach areas along roads and highways.

The brush has a working width of 500 mm and a diameter of 400 mm.
It is made of soft polymer fiber that does not damage the surface of signs but ensures high-quality removal of dirt, dust, and other contaminants.

To operate, the Pronar GM500 module requires a compatible boom.
It is compatible with the following models:
Pronar WWT420, WWT480, WWT600, WWT600P, WWT600K, WWT700T, WWT800T, WWT608K, WWP500, WWP500U, WWP500UH, WWP600, and WWP800U (Unimog).

Pronar GM500 module is an effective solution for municipal and road maintenance services responsible for maintaining road infrastructure and ensuring a clean and well-kept appearance of road signs and barriers.

The post GM 500 sign washing module first appeared on Budshlyakhmash.

GF100S milling module

annastasia2 — Sat, 04 Oct 2025 12:13:26 +0000

Pronar GF100S milling module is designed for shredding bushes, shoots, and tree roots.
It is mounted on multi-functional booms, which allows operation in hard-to-reach areas such as slopes, roadsides, and urban green zones.

The working width is 1000 mm, and the drum diameter is 435 mm.
The module provides a milling depth of up to 65 mm.

The hydraulic drive ensures stable performance and easy maintenance.
The equipment weight is 235 kg, making it reliable and durable in operation.

To operate, the Pronar GF100S milling module requires a compatible boom.
It is compatible with the following models:
Pronar WWT420, WWT480, WWT600, WWT600P, WWT600K, WWT700T, WWT800T, WWT608K, WWP500, WWP500U, WWP500UH, WWP600, and WWP800U (Unimog).

Pronar GF100S milling module is an essential piece of equipment for municipal and road maintenance services involved in maintaining green areas, cleaning roadsides, and removing stumps after tree felling.

The post GF100S milling module first appeared on Budshlyakhmash.

GN 200 scissors

annastasia2 — Sat, 04 Oct 2025 12:05:02 +0000

Pronar GN200 branch cutter is designed for trimming and shredding thick branches and brush along roads, in parks, and in green areas.
When mounted on multi-functional booms, it allows operation in hard-to-reach areas such as slopes, roadside ditches, and behind fences.

The working width is 2000 mm, which allows processing large areas in a single pass.
Two heavy-duty blades can cut branches up to 100 mm in diameter, ensuring high efficiency even under intensive use.

The hydraulic drive ensures stable operation, while the working speed reaches up to 5 km/h.
The equipment weight is 350 kg, which increases structural reliability and allows operation under load.

To operate, the Pronar GN200 cutter requires a compatible boom.
It is compatible with the following models:
Pronar WWT600, WWT600P, WWT600K, WWT700T, WWT800T, WWT608K, WWP500, WWP500U, WWP500UH, WWP600, and WWP800U (Unimog).

Pronar GN200 is a powerful tool for municipal and road maintenance services engaged in the care of greenery and ensuring the safety of roadside infrastructure.

The post GN 200 scissors first appeared on Budshlyakhmash.

GT 150 scissors

annastasia2 — Sat, 04 Oct 2025 11:58:40 +0000

Ножиці для гілок Pronar GT150 призначені для формування та обрізання кущів і дерев уздовж доріг, у парках, зелених зонах і на міських територіях. Завдяки монтажу на багатофункціональні стріли вони дозволяють працювати у важкодоступних місцях — біля огорож, на схилах і придорожніх канавах.

Робоча ширина ножиць становить 1500 мм. Конструкція обладнана трьома лезами, які забезпечують чистий зріз гілок діаметром до 20 мм. Гідравлічний привід гарантує стабільну і продуктивну роботу.

Вага обладнання становить 240 кг, що забезпечує надійність та довговічність у процесі експлуатації.

Для роботи ножиць Pronar GT150 необхідна стріла. Вони сумісні з моделями Pronar WWT420, WWT480, WWT600, WWT600P, WWT600K, WWT700T, WWT800T, WWT608K, WWP500, WWP500U, WWP500UH, WWP600 та WWP800U (Unimog).

Ножиці Pronar GT150 стануть ефективним інструментом для комунальних підприємств і дорожніх служб, які займаються доглядом за деревами та кущами, підтриманням безпеки дорожнього руху й утриманням зелених насаджень.

The post GT 150 scissors first appeared on Budshlyakhmash.

Branch saw GP 200

annastasia2 — Thu, 02 Oct 2025 12:45:17 +0000

Pronar GP200 branch saw is designed for cutting tree branches and shrubs along roads, in parks, and other green areas.
It is mounted on multi-functional booms and allows quick and safe maintenance of vegetation in hard-to-reach places.

The working width is 2200 mm.
The saw is equipped with four discs, each 500 mm in diameter and featuring 80 teeth, which ensures a clean and precise cut even under intensive operation.
The discs rotate at 2000 rpm, providing high performance and efficiency.

The hydraulic drive guarantees stable operation and easy maintenance.
The working speed reaches up to 5 km/h, while the equipment weight of 220 kg allows efficient mounting on various boom models.

To operate, the Pronar GP200 branch saw requires a compatible boom.
It is compatible with the following models:
Pronar WWT420, WWT480, WWT600, WWT600P, WWT600K, WWT700T, WWT800T, WWT608K, WWP500, WWP500U, WWP500UH, WWP600, and WWP800U (Unimog).

Pronar GP200 branch saw is an indispensable tool for municipal and road maintenance services responsible for the care of greenery and ensuring the safety of roadside infrastructure.

The post Branch saw GP 200 first appeared on Budshlyakhmash.

GK 140 mowing module

annastasia2 — Thu, 02 Oct 2025 12:22:18 +0000

Pronar GK140 mowing head is designed for efficient cutting of grass, brush, and small branches.
It is mounted on multi-functional booms, allowing access to hard-to-reach areas such as roadside ditches, slopes, areas behind fences, and road shoulders.

The module has a working width of 1400 mm and is equipped with a working shaft of 89 mm in diameter and a contour-following roller of 101.6 mm in diameter, ensuring precise ground copying.
A direct hydraulic drive with a power of 38 hp (28 kW) provides reliable and efficient operation.

The design features a 60×60 mm square mounting beam.
The head weighs 205 kg, and its 60 flail knives allow even and thorough shredding of vegetation, even under intensive use.

To operate, the Pronar GK140L mowing head requires a compatible boom.
It is compatible with Pronar WWT420 and Pronar WWT480 booms, which provide an optimal working range and secure mounting.

Pronar GK140L mowing head is an effective solution for municipal and road maintenance services engaged in the upkeep of roadsides, ditches, and urban green areas.

The post GK 140 mowing module first appeared on Budshlyakhmash.

GK 110 mowing module

annastasia2 — Thu, 02 Oct 2025 12:17:06 +0000

Pronar GK110 mowing head is designed for cutting grass, brush, and shredding branches.
Thanks to its robust construction and a larger working shaft diameter (133 mm), it is intended for intensive use in municipal and road maintenance operations.

The working width is 1100 mm.
The head is equipped with a contour-following roller with a diameter of 133 mm, ensuring precise terrain tracking.
A hydraulic intermediate drive with a power of 48 hp (35 kW) guarantees high performance and reliable operation.

The design includes an 80×80 mm square mounting beam.
The head weighs 294 kg, and its 10 flail knives ensure efficient vegetation shredding.

To operate, the Pronar GK110 mowing head requires a compatible boom.
It is compatible with the following models:
Pronar WWT600, WWT600P, WWT700T, WWT800T, WWT600K, WWP500, WWP500U, WWP500UH, and WWP600, allowing operators to choose the optimal configuration depending on working conditions.

Pronar GK110 mowing head is ideal for municipal services maintaining roadsides, ditches, slopes, and other challenging areas.

The post GK 110 mowing module first appeared on Budshlyakhmash.