In the summer season, it functions as a dump truck for transporting construction materials (bulk or loose). The spreading equipment is quick-detachable and can be installed into the dump body of the JAC N200. Mounting or removing the spreading unit, as well as attaching or detaching the snowplow blade, can be performed by a single operator, with the total setup time not exceeding 30 minutes.
The vehicle is equipped with a metal platform with rear unloading.

Cabin:

• Comfortable, insulated cabin with a sleeper berth

• Radiator protection mesh

• Pneumatic driver’s seat with armrest

• Mechanical passenger seat

• Driver and passenger seat belts

• Non-slip steps

• Additional handrails for cabin access

• Electrically adjustable headlights

• LED daytime running lights

• Spring-mounted cabin suspension

• Hydraulic cabin lift

Comfort:

• Air conditioning and radio

• Cruise control

• On-board computer

• Heated rear-view mirrors

• Electric window lifters

• Central locking with remote control via ignition key

• Car stereo with digital radio + USB/MP3

• Adjustable steering column

• Sun visors

• Cup holders, lighter, and ashtrays

Dump Platform (rear unloading):

• Body type: U-shaped (4450×2300×1000 mm)

• Capacity: 10.0 m³

• Unloading: rear

• The bottom is made of cross beams and welded 3 mm steel sheets, supporting side and front panels.

• The sides are made of 4 mm steel, height 1000 mm.

• Reinforced with stiffening ribs on the sides.

• Equipped with rubber shock absorbers, stabilizers, and safety cables.

• Rear panel fitted with a locking mechanism.

• Protective visor at the front of the body.

• Underside reinforced with a special structure to support the hydraulic cylinder base.

Snowplow Blade — PRONAR PU-S32H:

Designed for year-round road maintenance on paved urban roads.
The blade removes snow to the right or left side, with quick-change mounting. Installation and removal are performed by one operator within 30 minutes.

The PU-S35H snowplow blade is equipped with a rubber cutting edge, protective fenders, signal flags, and LED marker lights.

Spreading Equipment — PRONAR SPT 40:

• Purpose: Controlled electronic dosing system for spreading pre-set reagents (fine/coarse salt, fine/coarse sand, and crushed stone), with independent adjustment for dry or wet spreading.

• Hopper capacity: adjustable steel hopper, 4.5 / 5.25 / 6.0 m³.

• Brine tanks: total capacity 1800 liters.

• Drive system: autonomous Hatz 2G40 diesel engine.

This configuration ensures year-round operation, quick reconfiguration, and full compatibility with municipal service tasks such as road maintenance, de-icing, and snow removal.

The post Combined road machine MDKZ-32-31 (salt spreader) first appeared on Budshlyakhmash.

In the summer season, it is used as a dump truck for transporting construction (bulk and loose) materials. The salt-spreading equipment is quick-detachable and is installed in the JAC N200 dump body. Mounting or removing the salt spreader, as well as attaching or detaching the snowplow blade, is performed by a single operator. The duration of these operations does not exceed 30 minutes. The vehicle is equipped with a metal platform with rear unloading.

Cabin

• Comfortable cabin with additional insulation and a sleeping berth

• Mosquito net for engine radiator protection

• Pneumatic driver’s seat with armrest

• Mechanical passenger seat

• Seatbelts for driver and passenger

• Non-slip steps and additional handrails for cabin entry

• Electrically adjustable headlights

• LED daytime running lights

• Spring-mounted cabin suspension

• Hydraulic cabin lift

Comfort

• Air conditioner and radio

• Cruise control

• On-board computer

• Heated rearview mirrors

• Electric window lifts

• Central locking with remote ignition key control

• Car audio system with digital radio + USB/MP3

• Adjustable steering column

• Sun visors

• Cup holders, lighter, and ashtrays

Standard Equipment

• Aluminum fuel tank with lock

• Heated fuel filter-separator

• Glow plugs

• Pneumatic horns

• Reverse motion alarm

• Front energy-absorbing bumper

• Frost-resistant rubber components

Dump Platform (Rear Unloading)

• Body type: U-shaped (4450×2300×1000 mm)

• Body volume: 10.0 m³

• Unloading: rear

• Floor made of cross beams and 3 mm welded steel sheets, with side and front panels installed on top

• Side panels made of 4 mm steel

• Side height: 1000 mm

• Reinforced ribs on side panels

• Equipped with rubber shock absorbers, stabilizers, and safety cables

• Rear panel with locking mechanism

• Protective visor at the front of the body

• Reinforced bottom frame with a welded hydraulic cylinder mounting base

Snowplow Blade – PRONAR PU-S32H

Designed for year-round maintenance of urban roads with hard surfaces.
The working principle is to clear snow to the right or left side of the road.
The PRONAR PU-S32H snowplow is quick-detachable — installation or removal can be performed by one operator within 30 minutes.

Features:

• Rubber cutting edge

• Protective fenders with deflectors

• Signal flags

• LED lighting

Salt-Spreading Equipment – PRONAR SPT 40

Purpose: precise electronic dosing system for spreading preloaded materials (fine salt, coarse salt, fine sand, coarse sand, and crushed stone), with independent adjustment of dry or wet spreading modes.

Hopper capacity (m³): made of structural steel, adjustable in volume — 4.5 / 5.25 / 6.0
Brine tank total capacity: 1800 liters
Drive system: autonomous diesel engine (Hatz 2G40 model)

This configuration provides a versatile all-season road maintenance vehicle that combines the functions of a dump truck, snowplow, and salt spreader, ideal for municipal and utility services.

The post Combined road machine MDKZ-26-31 (salt spreader) first appeared on Budshlyakhmash.

In the summer season, it operates as a dump truck for transporting construction materials (bulk and loose loads). The salt-spreading equipment is quick-detachable and is mounted inside the JAC N200 dump body. Installation or removal of the salt spreader, as well as attachment or detachment of the snowplow blade, can be performed by a single operator. The total duration of these operations does not exceed 30 minutes. The vehicle is equipped with a metal platform with rear unloading.

Cabin

• Comfortable, insulated cabin with a sleeping berth

• Mosquito net protecting the engine radiator

• Pneumatic driver’s seat with armrest

• Mechanical passenger seat

• Seatbelts for driver and passenger

• Non-slip steps and additional handrails for entry

• Electrically adjustable headlights

• LED daytime running lights

• Spring-mounted cabin suspension

• Hydraulic cabin lift

Comfort Features

• Air conditioner and radio

• Cruise control

• On-board computer

• Heated rearview mirrors

• Electric window lifts

• Central locking with remote ignition key control

• Car audio with digital radio + USB/MP3

• Adjustable steering column

• Sun visors

• Cup holders, lighter, and ashtrays

Standard Equipment

• Aluminum fuel tank with lock

• Heated fuel filter-separator

• Glow plugs

• Pneumatic horns

• Reverse alarm

• Front energy-absorbing bumper

• Frost-resistant rubber components

• Enclosed battery compartment

Dump Platform (Rear Unloading)

• Body type: U-shape (4450×2300×1000 mm)

• Body volume: 10.0 m³

• Rear unloading system

• Floor reinforced with cross beams and 3 mm welded steel sheets, with side and front panels mounted above

• Side panels made of 4 mm steel

• Side height: 1000 mm

• Reinforced ribs on the sides

• Equipped with rubber shock absorbers, stabilizers, and safety cables

• Rear gate with locking mechanism

• Protective visor at the front of the body

• Reinforced lower frame with welded hydraulic cylinder mounting base

Snowplow Blade – PRONAR PU-S35H

Designed for year-round maintenance of urban roads with hard surfaces.
The snowplow blade clears snow to the right or left side of the road.
It is quick-detachable — installation or removal can be performed by a single operator within 30 minutes.

Features:

• Rubber cutting edge

• Protective fenders with splash guards

• Signal flags

• LED lighting

Salt-Spreading Equipment – PRONAR SPT 40

Purpose: precise electronic dosing system for distributing standard de-icing materials (fine or coarse salt, fine or coarse sand, crushed stone), with the ability to adjust dry or wet spreading modes independently.

Hopper capacity (m³): made of structural steel, adjustable in volume — 4.5 / 5.25 / 6.0
Brine tank total capacity: 1800 liters
Drive system: autonomous diesel engine (Hatz 2G40 model)

This configuration provides a universal all-season road maintenance vehicle, combining the functionality of a dump truck, snowplow, and salt spreader, ideal for municipal and road maintenance operations.

The post Combined road machine MDKZ-26-32 (salt spreader)… first appeared on Budshlyakhmash.

Cabin

• Comfortable cabin with additional insulation and a sleeping berth

• Mosquito net protecting the engine radiator

• Pneumatic driver’s seat with armrest

• Mechanical passenger seat

• Seatbelts for driver and passenger

• Non-slip steps and additional handrails for cabin entry

• Electrically adjustable headlights

• LED daytime running lights

• Spring-mounted cabin suspension

• Hydraulic cabin lift

Comfort Features

• Air conditioner and radio

• Cruise control

• On-board computer

• Heated rearview mirrors

• Electric window lifts

• Central locking with remote ignition key control

• Car audio system with digital radio + USB/MP3

• Adjustable steering column

• Sun visors

• Cup holders, lighter, and ashtrays

Standard Equipment

• Aluminum fuel tank with lock

• Heated fuel filter-separator

• Glow plugs

• Pneumatic horns

• Reverse motion alarm

• Front energy-absorbing bumper

• Frost-resistant rubber components

Dump Platform (Rear Unloading)

• Body type: U-shaped (4450×2300×1000 mm)

• Body volume: 10.0 m³

• Rear unloading

• Floor reinforced with cross beams and 3 mm welded steel sheets, with side and front panels mounted above

• Side panels made of 4 mm steel

• Side height: 1000 mm

• Reinforced ribs on the sides

• Equipped with rubber shock absorbers, stabilizers, and safety cables

• Rear panel with locking mechanism

• Protective visor at the front of the body

• Reinforced bottom frame with a welded hydraulic cylinder mounting base

Snowplow Blade – PRONAR PU-S32H

Designed for year-round maintenance of urban roads with hard surfaces. The snowplow blade clears snow to the right or left side of the roadway. The PRONAR PU-S32H snowplow is quick-detachable — installation or removal can be performed by a single operator within 30 minutes.
Features:

• Rubber cutting edge

• Protective mud flaps on the wings

• Signal flags

• LED clearance lighting

Salt-Spreading Equipment – PRONAR SPT 40

Purpose: electronic precision dosing system for spreading standard reagents (fine salt, coarse salt, fine sand, coarse sand, and crushed stone), with independent adjustment for dry or wet spreading.
Hopper capacity (m³): made of structural steel with adjustable volume — 4.5 / 5.25 / 6.0
Total brine tank capacity: 1800 liters
Drive system: autonomous diesel engine (Hatz 2G40 model)

This configuration provides a versatile, all-season road maintenance vehicle, combining the functionality of a dump truck, snowplow, and salt spreader, ideal for municipal and road maintenance operations.

The post MDKZ 32 31 – a modern combined road machine first appeared on Budshlyakhmash.