Самоскид зерновоз JAC N120 із заднім розвантаженням — надійне рішення для аграрного сектору. Завдяки вантажопідйомності 7 тонн і міцному шасі, автомобіль ефективно транспортує зерно, сипучі матеріали та інші вантажі.

Кузов об’ємом 15 м³ обладнаний заднім типом розвантаження, що забезпечує швидке та безпечне вивантаження. Посилені борти та підлога гарантують довговічність конструкції навіть під час інтенсивної експлуатації.

Потужний дизельний двигун Cummins Euro 5 на 206 к.с. поєднує продуктивність з економічністю та відповідає сучасним екологічним стандартам. Самоскид JAC N120 відзначається маневреністю й високою прохідністю, що робить його універсальним як для міських умов, так і для сільської місцевості.

Практичні переваги для аграрного бізнесу
Міцна рама JAC N120 забезпечує витривалість навіть під час інтенсивних перевезень зерна по розбитих дорогах чи польових під’їздах. Завдяки паливному баку на 210 літрів зерновоз може працювати тривалий час без зупинок на дозаправку — це особливо цінно в розпал жнив, коли важлива кожна година.

Для водія передбачений високий рівень комфорту, що дозволяє витримувати тривалі зміни.

Група компаній «ТурбівСпецМаш» — офіційний дилер JAC в Україні, забезпечує повний цикл гарантійного та післягарантійного обслуговування.

The post Grain truck with rear unloading JAC N 120 first appeared on Budshlyakhmash.

The post Rear-loading garbage truck SBM 403/4 based on JAC N200 first appeared on Budshlyakhmash.

• Tank

• Vacuum pump with drive

• Safety and signaling device

• Suction hatch with intake hose

• Control valves with pipeline

• Additional electrical equipment

When ordering a special-purpose vehicle from our company, you receive a quality guarantee and access to comprehensive service support. All necessary spare parts for municipal and other machinery are readily available.

The machines are manufactured in Ukraine at the Spetsbudmash plant.

The post Vacuum (sewage) machine KO-503V-25 based on Hyundai EX10 first appeared on Budshlyakhmash.

In the summer season, it functions as a dump truck for transporting construction materials (bulk or loose). The spreading equipment is quick-detachable and can be installed into the dump body of the JAC N200. Mounting or removing the spreading unit, as well as attaching or detaching the snowplow blade, can be performed by a single operator, with the total setup time not exceeding 30 minutes.
The vehicle is equipped with a metal platform with rear unloading.

Cabin:

• Comfortable, insulated cabin with a sleeper berth

• Radiator protection mesh

• Pneumatic driver’s seat with armrest

• Mechanical passenger seat

• Driver and passenger seat belts

• Non-slip steps

• Additional handrails for cabin access

• Electrically adjustable headlights

• LED daytime running lights

• Spring-mounted cabin suspension

• Hydraulic cabin lift

Comfort:

• Air conditioning and radio

• Cruise control

• On-board computer

• Heated rear-view mirrors

• Electric window lifters

• Central locking with remote control via ignition key

• Car stereo with digital radio + USB/MP3

• Adjustable steering column

• Sun visors

• Cup holders, lighter, and ashtrays

Dump Platform (rear unloading):

• Body type: U-shaped (4450×2300×1000 mm)

• Capacity: 10.0 m³

• Unloading: rear

• The bottom is made of cross beams and welded 3 mm steel sheets, supporting side and front panels.

• The sides are made of 4 mm steel, height 1000 mm.

• Reinforced with stiffening ribs on the sides.

• Equipped with rubber shock absorbers, stabilizers, and safety cables.

• Rear panel fitted with a locking mechanism.

• Protective visor at the front of the body.

• Underside reinforced with a special structure to support the hydraulic cylinder base.

Snowplow Blade — PRONAR PU-S32H:

Designed for year-round road maintenance on paved urban roads.
The blade removes snow to the right or left side, with quick-change mounting. Installation and removal are performed by one operator within 30 minutes.

The PU-S35H snowplow blade is equipped with a rubber cutting edge, protective fenders, signal flags, and LED marker lights.

Spreading Equipment — PRONAR SPT 40:

• Purpose: Controlled electronic dosing system for spreading pre-set reagents (fine/coarse salt, fine/coarse sand, and crushed stone), with independent adjustment for dry or wet spreading.

• Hopper capacity: adjustable steel hopper, 4.5 / 5.25 / 6.0 m³.

• Brine tanks: total capacity 1800 liters.

• Drive system: autonomous Hatz 2G40 diesel engine.

This configuration ensures year-round operation, quick reconfiguration, and full compatibility with municipal service tasks such as road maintenance, de-icing, and snow removal.

The post Combined road machine MDKZ-32-31 (salt spreader) first appeared on Budshlyakhmash.

During the summer season, the MDKZ-27-00 multifunctional road vehicle is used for washing and watering road surfaces, as well as cleaning the curb lane. The vehicle can also be used for watering green areas and as an auxiliary firefighting unit.

In the winter season, when equipped with plow and brush attachments, the machine is used for snow removal; when equipped with spreading equipment, it distributes inert materials across road surfaces for de-icing and traction improvement.

The machine is equipped with washing, spreading, and plow-brush systems.

The washing equipment includes:

• a tank and water pump,

• a pipeline system with valves and adjustable nozzles.

The tank can be filled either from a water supply network or directly from a natural water source through an intake pipe. Water from the pump is fed under pressure through the delivery pipeline to the nozzles, and by adjusting the nozzle angle and pump operating mode, the operator can switch between watering and washing functions.

Snowplow blade:

• Working width: 2.4 m

• Turning angle: ±30° relative to the vehicle axis, allowing snow to be directed to either side as required.

This configuration enables the MDKZ-27-00 to perform year-round road maintenance, combining multiple functions in one vehicle for municipal and infrastructure services.

The post Combined road machine MDKZ-27-00 first appeared on Budshlyakhmash.

The quick installation and removal of the snowplow blade allow the machine to be easily adapted for different types of work.

During the summer season, the MDKZ-27-44 is used for transporting construction materials, bulk cargo, and other loads, with the convenience of easy unloading.

In the winter season, when equipped with plow and brush attachments, the machine is used for clearing snow from road surfaces.

Snowplow blade:

• Working width: 2.4 m

• Turning angle: ±30° relative to the vehicle axis, allowing snow to be directed to either side as needed.

The MDKZ-27-44 is an efficient and adaptable solution for municipal and road maintenance services, offering year-round functionality and high operational reliability.

The post Road combined machine MDKZ-27-44 first appeared on Budshlyakhmash.