The machine can be coupled with tractors or other carriers equipped with a lower or upper hitch and a power take-off (PTO) shaft. The working components are hydraulically driven: the side disc brushes sweep debris toward the center, the main roller brush feeds it onto a conveyor, and the conveyor transports it to a 3 m³ waste container. Waste is hydraulically unloaded to the right side.

The ZMC 3.1 is equipped with two hydraulic pumps, its own oil tank, and a water-spraying system with a 1120-liter water reservoir to prevent dust formation. All machine functions are controlled via a control panel located in the tractor’s cab.

The working width ranges from 2400 to 2700 mm and can reach up to 3100 mm in its maximum configuration. The main roller brush is 1100 mm long, while the side disc brushes have a diameter of 1100 mm. The working speed ranges from 1 to 20 km/h.

The Pronar ZMC 3.1 is a powerful and versatile sweeping machine with a large waste container and high productivity, designed to operate efficiently in demanding urban environments.

The post Sweeper ZMC 3.1 first appeared on Budshlyakhmash.

The machine can be mounted on tractors via the front or rear three-point hitch (category I or II). When mounted at the rear, it can be equipped with a roller-type spreader or a special snow-cleaning brush. In versions with a water tank, a sprinkler system is included to reduce dust formation during sweeping.

The working width for sweeping is 1600 mm (straight) or 1440 mm (angled ±30°). For spreading, the width is 1170 mm and 1020 mm, respectively. The maximum performance reaches 16,000 m²/h, making the ZM-P16 an efficient solution for both urban and road maintenance tasks.

The brush drive can be mechanical (via PTO) or hydraulic. The machine operates at carrier speeds of up to 10 km/h and weighs between 240 and 415 kg, depending on configuration. It features a 12 V electrical system and a hydraulic supply with a pressure of 16 MPa.

The spreading dosage is controlled by a potentiometer, allowing precise adjustment of material output intensity.

The Pronar ZM-P16 is a multifunctional sweeping and spreading machine that combines ease of operation, high efficiency, and reliability—ensuring thorough cleaning and surface treatment under any conditions.

The post Sweeping and spreading machine ZM-P16 first appeared on Budshlyakhmash.

The machine is equipped with a cylindrical brush with a diameter of 650 mm, available in eight variants (four bristle stiffness levels and two ring types — flat or “honeycomb”). The working width is 2800 mm, and 2600 mm when angled to the maximum. The hydraulic brush rotation range of ±25° allows for easy adjustment when working near curbs or road edges.

For ease of operation, the ZM-28H includes support wheels with continuously adjustable height and a position indicator that helps set the optimal working height relative to the surface. The maximum hydraulic system pressure is 21 MPa, and the electrical system operates on 12 V.

With a performance of up to 15,600 m²/h, a compact weight of 478 kg, and versatile adjustment options, the Pronar ZM-28H sweeping machine is an efficient solution for municipal, road maintenance, and agricultural operations.

The post Sweeper ZM-28H first appeared on Budshlyakhmash.

The machine can be equipped with two side brushes, each 600 mm in diameter, which extend the working area and enable effective cleaning near curbs on both sides. The brush rotation speed can be adjusted by the operator, allowing adaptation to different working conditions.

To minimize dust, the model is equipped with a sprinkler system and a 320-liter water tank. The debris container has a capacity of 470 liters, enabling long operation without frequent emptying. The working width starts from 2300 mm, and the cleaning efficiency reaches up to 13,800 m²/h, making the ZM-2300M an optimal solution for municipal enterprises.

A universal mounting frame allows the machine to be attached to various vehicles — from tractors to loaders. The working speed is 6 km/h, and the connection is made through a three-point linkage (category II). The machine operates via a hydraulic drive with a working pressure of 16 MPa and a 12 V electrical supply.

The Pronar ZM-2300M is a reliable sweeping machine for municipal services, ensuring high-quality cleaning of streets, squares, and other hard surfaces while reducing dust and simplifying daily urban maintenance.

The post Sweeper ZM-2300M first appeared on Budshlyakhmash.

The post Sweeper AGATA ZM-2000M first appeared on Budshlyakhmash.

The post Sweeper AGATA ZM-2000 first appeared on Budshlyakhmash.

https://www.youtube.com/watch?v=6WpQK5Zv6Rg

The post Sweeper AGATA ZM-1600 first appeared on Budshlyakhmash.

The post Sweeper AGATA ZM-1400 first appeared on Budshlyakhmash.

The post Sweeper AGATA ZM-1250 first appeared on Budshlyakhmash.

The post Sweeper AGATA ZM-1250 first appeared on Budshlyakhmash.